IDES Prospector Already have an account? Login Here

IDES

Purell 2410T

Low Density Polyethylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Purell 2410T is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first. To discuss a medical/pharmaceutical application please contact: your local Distributor or your local Basell contact Purell 2410T is low-density polteythlene (LDPE) natural resin
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Ethylene Oxide Sterilizable
  • Fast Molding Cycle
  • High Flow
  • Low Density
  
Uses 
  • Caps
  • Closures
  • Medical Appliances
  • Medical/Healthcare Applications
  • Pharmaceuticals
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance (F0)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Ball Indentation Hardness (H 49/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Melting Temperature (DSC)
°F
 ISO 3146
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Purell 2410T, Purell , Purell2410T, 2410 T, 2410T, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, LyondellBasell, PolyethyleneLowDensity, T2410
Features
Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Low Density, Low Specific Gravity, High Flow, High Melt, High MFI, Ethylene Oxide Sterilizable, EtO Sterilizable, EtO Sterilization, Ethylene Oxide Sterilizable.
Uses
Uses may also be described by the following terms: Medical Applications, Closure Caps, Caps, Cap.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.