RAMSHINE PV300G6 Polyram Acrylonitrile Butadiene Styrene (Glass Fiber Reinforcement, 30%)

Product Description

30% GLASS-FIBER REINFORCED, HEAT RESISTANCE AND MINIMAL MOULD SHRINKAGE ABS FOR INJECTION MOULDING APPLICATIONS.

General

Material Status

Availability

Filler / Reinforcement

Additive

Features

RoHS Compliance

Processing Method

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)
220°C/10.0 kg		g/10 min	ASTM D1238
300°C/1.2 kg		g/10 min	ISO 1133
Molding Shrinkage
Flow		in/in	ASTM D955
--		%	ISO 2577
Water Absorption
Saturation		%	ASTM D570
Saturation, 73°F		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)		psi	ASTM D638, ISO 527-2
Tensile Elongation (Break)		%	ASTM D638, ISO 527-2
Flexural Modulus		psi	ASTM D790, ISO 178
Flexural Strength		psi	ASTM D790, ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact
73°F		ft·lb/in	ASTM D256
73°F		ft·lb/in²	ISO 180
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785, ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648, ISO 75-2/A
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.118 in)			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RAMSHINE PV300G6, RAMSHINE , RAMSHINEPV300G6, PV 300 G 6, PV300G6, PV300, 300G, G6, Acrylonitrile Butadiene Styrene, ABS, Polyram, AcrylonitrileButadieneStyrene, 300PV
Features
Features may also be described by the following terms: Low Shrinkage, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.

Notes

¹Typical properties: these are not to be construed as specifications.

RAMSHINE PV300G6