Salflex 355A Salflex Polymers Ltd. Thermoplastic Vulcanizate

General

Material Status

Availability

Features

Uses

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Molding Shrinkage		%	ISO 294-4
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)		psi	ISO 37
Tensile Stress (Break)		psi	ISO 37
Tensile Elongation (Break)		%	ISO 37
Tear Strength²		lbf/in	ISO 34-1
Compression Set (257°F, 70.0 hr)		%	ISO 815
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A, 15 sec)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature (Type B)		°F	ISO 812
Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (302°F, 168 hr)		%	ISO 188
Change in Tensile Strain at Break in Air (302°F, 168 hr)		%	ISO 188
Change in Shore Hardness in Air (Shore A, 302°F, 168 hr)			ISO 188
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Salflex 355A, Salflex , Salflex355A, 355 A, 355A, Thermoplastic Vulcanizate, TPV, Thermoplastic Elastomer, TPE, ThermoplasticVulcanizate, ThermoplasticElastomer, A355
Features
Features may also be described by the following terms: High Impact Resistance, Good Flexibility, Flexible, Good Tear Strength.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Extrusion	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Melt Temperature		°F
Die Temperature		°F
Extrusion Notes
Blow Molding Mold Temperature: 5 to 60°C

Notes

¹Typical properties: these are not to be construed as specifications.

²Method Bb, Angle (Nicked)

Salflex 355A