Salflex 910 Salflex Polymers Ltd. Polyethylene, High Density (Mica Filler, 10%)

General

Material Status

Availability

Filler / Reinforcement

Features

Uses

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)		g/10 min	ISO 1133
Molding Shrinkage		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180/1A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/B
Additional Information
Ash Content, ISO 3451/1A: 10.7%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Salflex 910, Salflex , Salflex910, 910, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PolyethyleneHighDensity
Features
Features may also be described by the following terms: Medium Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.

Extrusion	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Melt Temperature		°F
Die Temperature		°F
Extrusion Notes
Blow Molding Mold Temperature: 20 to 60°C

Salflex 910