IDES Prospector Already have an account? Login Here

IDES

Salflex 510T

High Density Polyethylene

Talc Filler, 10%

Supplied by Salflex Polymers Ltd.

The technical datasheet with complete property values for Salflex 510T is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc Filler, 10% Filler by Weight
Features 
  • Medium Impact Resistance
Uses 
  • Automotive Applications
  • Industrial Applications
  
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Additional Information
Ash Content, ISO 3451/1A: 11%
Elongation at Break, ISO 527: No Break
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Salflex 510T, Salflex , Salflex510T, 510 T, 510T, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, PolyethyleneHighDensity, T510
Features
Features may also be described by the following terms: Medium Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Blow Molding Mold Temperature: 20 to 60°C
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.