IDES Prospector Already have an account? Login Here

IDES

VESTOSINT® 1101 white

Polyamide 12

Supplied by Evonik Degussa GmbH

The technical datasheet with complete property values for VESTOSINT® 1101 white is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
VESTOSINT 1101 white is the standard fluidized bed coating powder based on polyamide 12. It is most suitable for the coating of wire goods.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Uses 
  • Coating Applications
  • Wire Jacketing
  
Appearance 
  • White
Forms 
  • Powder
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Water Absorption
     ISO 62
Saturation, 212°F 2
%
  
Saturation, 73°F 3
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Taber Abrasion Resistance (100 Cycles, 500 g, CS-17 Wheel)
mg
 ASTM D1242
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Ball Indentation Hardness 4
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
 ISO 3146
CLTE - Flow (73 to 131°F)
in/in/°F
 ISO 11359-2
Specific Heat
Btu/lb/°F
 ASTM C351
Thermal Conductivity
Btu·in/hr/ft²/°F
 DIN 52612
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Electric Strength 5
V/mil
 IEC 60243-1
Additional Information
Nominal Value
Unit
Test Method
Particle Size Distribution
     ISO 4610
< 1.3 mil
wt%
  
< 3.9 mil
wt%
  
< 9.8 mil
wt%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VESTOSINT® 1101 white, VESTOSINT 1101 white, VESTOSINT® , VESTOSINT, VESTOSINT1101white, 1101 white, 1101white, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Evonik Degussa, Polyamide12, Nylon12, white1101
Generic Name
Generic Name may also be described by the following terms: PA12.
Notes
1Typical properties: these are not to be construed as specifications.
2Immersion
396%RH
4H30
5K20/P50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.