IDES Prospector Already have an account? Login Here

IDES

Bergadur™ PB40 G30 UF UV

Polybutylene Terephthalate

Glass Fiber Reinforcement, 30%

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Bergadur™ PB40 G30 UF UV is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
 
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Flame Retardant
  • Halogen Free
  • Low (to None) Phosphorus Content
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
DIN 53479
Melt Volume-Flow Rate (MVR) (250°C/1.6 kg)
in³/10min
ISO 1133
Ash Content
%
ISO 3451
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2/1
Tensile Stress (Break, 73°F)
psi
ISO 527-2/5
Tensile Strain (Break, 73°F)
%
ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1 e A
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1 eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Maximum Use Temperature
    IEC 60216
-- 3
°F
 
Short Time
°F
 
Melting Temperature (DSC)
°F
ISO 3146
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index (Solution A)
V
IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
Internal Method
Glow Wire Ignition Temperature (0.118 in)
°F
IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bergadur™ PB40 G30 UF UV, Bergadur PB40 G30 UF UV, Bergadur™ , Bergadur, BergadurPB40G30UFUV, PB 40 G 30 UF UV, PB40 G30 UF UV, PB40, 40G, G30, 30UF, UFUV, PB40G30UFUV, Polybutylene Terephthalate, PBT, Polyester, PolyOne, PolybutyleneTerephthalate, 40PB
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free, Low Phosphorus Content.
Notes
1Typical properties: these are not to be construed as specifications.
2±0.03 g/cm³
3Continuous (GTP 50% Tensile)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.