IDES Prospector Already have an account? Login Here

IDES

Geon™ HTX E1502

Polyvinyl Chloride Alloy

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Geon™ HTX E1502 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
VSI FLAMMABILITY:Burn Length (0.040 in Bar)ASTM D635 0* IN.Burn Time (0.040 in Bar) ASTM D635 0* Sec.*Extinguished before 25 MM starting ref mark.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Additive 
  • Impact Modifier
Features 
  • Impact Modified
Uses 
  • Automotive Interior Parts
  • Siding Substrate
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
PVC Cell Classification
 
 ASTM D1784
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2 (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in, Compression Molded)
ft·lb/in
 ASTM D256A
Drop Impact Resistance
     ASTM D4226
73°F 3
in·lb/mil
  
73°F 4
in·lb/mil
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, 15 sec)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.125 in
°F
  
66 psi, Annealed, 0.125 in
°F
  
264 psi, Unannealed, 0.125 in
°F
  
264 psi, Annealed, 0.125 in
°F
  
CLTE - Flow
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geon™ HTX E1502, Geon HTX E1502, Geon™ HTX , Geon HTX, GeonHTXE1502, GeonHTX, HTXE 1502, HTXE1502, HTX, E 1502, E1502, Polyvinyl Chloride Alloy, PVC Alloy, Polyvinyl Chloride, PVC, PolyOne, PolyvinylChlorideAlloy, PVCAlloy, PolyvinylChloride, 1502E, 1502HTXE
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
3Procedure A, C.125 Dart
4Procedure B, C.125 Dart
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.