IDES Prospector Already have an account? Login Here

IDES

VESTODUR® 3010

Polybutylene Terephthalate

Supplied by Evonik Degussa GmbH

The technical datasheet with complete property values for VESTODUR® 3010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High viscosity polybutylene terephthalate with improved hydrolysis resistance and heat stability

VESTODUR 3010 is a high viscosity polybutylene terephthalate resin for extrusion, with an improved resistance to hydrolysis.

This resin is especially suitable for the manufacture of stiff, small diameter tubing, e.g., for loose fiber optic buffer tubes.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Heat Stabilizer
  • Hydrolysis Resistant
  
Features 
  • Heat Stabilized
  • High Viscosity
  • Hydrolysis Resistant
Uses 
  • Fiber Optic Cable Jacketing
  • Tubing
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)
in³/10min
 ISO 1133
Molding Shrinkage 2
     ISO 294-4
Across Flow: 176°F, 0.0787 in
%
  
Flow: 176°F, 0.0787 in
%
  
Water Absorption (Saturation, 73°F)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain
      
Yield
%
 ISO 527-2/50
Break
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F, Complete Break
ft·lb/in²
  
73°F, Complete Break
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F, Partial Break
ft·lb/in²
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A
--
°F
 ISO 306/B
CLTE
     ISO 11359-2
Flow: 73 to 131°F
in/in/°F
  
Transverse: 73 to 131°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity 3
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
     IEC 60112
Solution A 4
V
  
Solution A
V
  
Electric Strength 5
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0315 in
 
  
0.0630 in
 
  
Oxygen Index
%
 ISO 4589-2
Additional Information
Nominal Value
Unit
Test Method
Electrolytical Corrosion - Step
 
 IEC 60426
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VESTODUR® 3010, VESTODUR 3010, VESTODUR® , VESTODUR, VESTODUR3010, 3010, Polybutylene Terephthalate, PBT, Polyester, Evonik Degussa, PolybutyleneTerephthalate
Features
Features may also be described by the following terms: High Viscosity, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Tubing, Tube, Fiber Optic Cable Jacketing.
Notes
1Typical properties: these are not to be construed as specifications.
2determined on 2 mm sheets with film gate at rim mold temperature 80°C
3Roa
4100 drops value
5K20/P50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.