IDES Prospector Already have an account? Login Here

IDES

VESTODUR® 2002-FR3

Polybutylene Terephthalate

Supplied by Evonik Degussa GmbH

The technical datasheet with complete property values for VESTODUR® 2002-FR3 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polybutylene terephthalate compounds
Self extinguishing by non-migrating and non-corrosive flame retardant

VESTODUR® FR3-Series are unreinforced respectively glass fiber reinforced, semi-crystalline thermoplastic compounds for injection molding, based on polybutylene terephthalate (PBT). They have a creamy-white color.

Test bars made of these compounds are rated V-0, according UL94 by Underwriters Laboratories Inc., self-extinguishing and non-dripping.

These compounds are especially suitable for parts which are subjected to high mechanical and thermal loads and must have a very good flame-resistance.

The incorporated flame retardant is nonmigrating and does not contain polybrominated diphenyl ethers. The additive has no corrosive effects on metal inserts or neighboring metal parts. Therefore, the compounds are distinguished for moldings in the electrical and electronical industry. Laser marking with high contrasts is possible.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Bromine Free
  • Flame Retardant
  • Laser Markable
  • Low to No Migration
  • Medium Viscosity
  • Non-Corrosive
  • Self Extinguishing
  • Semi Crystalline
Uses 
  • Electrical Parts
  • Electrical/Electronic Applications
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)
in³/10min
 ISO 1133
Molding Shrinkage 2
     ISO 294-4
Across Flow: 176°F, 0.0787 in
%
  
Flow: 176°F, 0.0787 in
%
  
Water Absorption (Saturation, 73°F)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain
     ISO 527-2
Yield
%
  
Break
%
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F, Complete Break
ft·lb/in²
  
73°F, Complete Break
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F, Complete Break
ft·lb/in²
  
73°F, Complete Break
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A
--
°F
 ISO 306/B
CLTE
     ISO 11359-2
Flow: 73 to 131°F
in/in/°F
  
Transverse: 73 to 131°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
     IEC 60112
Solution A 3
V
  
Solution A
V
  
Electric Strength 4
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0157 in
 
  
0.0315 in
 
  
0.0630 in
 
  
Glow Wire Flammability Index (0.0394 in)
°F
 IEC 60695-2-12
Glow Wire Ignition Temperature (0.0394 in)
°F
 IEC 60695-2-13
Oxygen Index
%
 ASTM D2863
Additional Information
Nominal Value
Unit
Test Method
Electrolytical Corrosion - Step
 
 IEC 60426
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VESTODUR® 2002-FR3, VESTODUR 2002FR3, VESTODUR® , VESTODUR, VESTODUR2002FR3, 2002, 2002 FR 3, 2002-FR3, 2002FR3, 2002:FR3, 2002/FR3, 2002+FR3, 2002_FR3, 2002 FR3, 2002FR, FR3, Polybutylene Terephthalate, PBT, Polyester, Evonik Degussa, PolybutyleneTerephthalate, FR2002
Features
Features may also be described by the following terms: Semi-Crystalline, Self Extinguishing, Self-Extinguishing, Low Migration, Bromine Free, No Bromine Content, Non-Corrosive, Non Corrosive, Medium Viscosity.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2determined on 2 mm sheets with film-gate at rim, mold temperature 80 °C
3100 drops value
4K20/P50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.