IDES Prospector Already have an account? Login Here

IDES

VESTAKEEP® 4000 GF30

Polyetheretherketone

Glass Fabric Reinforcement, 30%

Supplied by Evonik Degussa GmbH

The technical datasheet with complete property values for VESTAKEEP® 4000 GF30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Glass fiber-reinforced (30%) polyether ether ketone

VESTAKEEP 4000 GF30 is a glass fiber reinforced (30%) polyether ether ketone for injection molding.

The semi-crystalline polymer features superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP 4000 GF30 are self-extinguishing.

VESTAKEEP 4000 GF30 can be processed on common injection molding machines for thermoplastics.

We recommend a melt temperature of 380°C to 400°C during the injection molding process. The mold temperature should be in a range of 160°C to 200°C, preferably 180°C.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Filler / Reinforcement 
  • Glass Fabric Reinforcement, 30% Filler by Weight
Features 
  • Good Chemical Resistance
  • Self Extinguishing
  • Semi Crystalline
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (380°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage 2
     ISO 294-4
Across Flow: 356°F, 0.0787 in
%
  
Flow: 356°F, 0.0787 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F, Complete Break
ft·lb/in²
  
73°F, Complete Break
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F, Complete Break
ft·lb/in²
  
73°F, Complete Break
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A
--
°F
 ISO 306/B
Melting Temperature (DSC) 3
°F
 ISO 3146
CLTE - Flow (73 to 131°F)
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
50 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
     IEC 60112
Solution A 4
V
  
Solution A
V
  
Electric Strength 5
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0315 in
 
  
0.0630 in
 
  
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Glow Wire Ignition Temperature (0.0787 in)
°F
 IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VESTAKEEP® 4000 GF30, VESTAKEEP 4000 GF30, VESTAKEEP® , VESTAKEEP, VESTAKEEP4000GF30, 4000 GF 30, 4000 GF30, 4000GF, GF30, 4000GF30, Polyetheretherketone, PEEK, Polyaryletherketone, PAEK, Evonik Degussa, GF4000
Features
Features may also be described by the following terms: Semi-Crystalline, Good Chemical Resistance, Chemical Resistant, Self Extinguishing, Self-Extinguishing.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2determined on 2 mm sheets with film gate at rim mold temperature 180°C
32nd heating
4100 drops value
5K20/P50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.