IDES Prospector Already have an account? Login Here

IDES

M. Holland Branded Resins PP100

Polypropylene Homopolymer

Supplied by M. Holland Company

The technical datasheet with complete property values for M. Holland Branded Resins PP100 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
General Purpose Polypropylene Homopolymer
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Melt Strength
  • High Clarity
  • High Tensile Strength
  • Homopolymer
  
Uses 
  • Sheet
  • Strapping
  • Thin-walled Parts
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Sheet Extrusion
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: M. Holland Branded Resins PP100, M Holland Branded Resins PP100, M. Holland Branded Resins , M Holland Branded Resins, MHollandBrandedResinsPP100, MHollandBrandedResins, ResinsPP 100, ResinsPP100, Resins, PP 100, PP100, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, M. Holland, PolypropyleneHomopolymer, PPHomopolymer, 100PP, 100ResinsPP
Features
Features may also be described by the following terms: Good Melt Strength, High Tensile Strength, High Clarity.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.