IDES Prospector Already have an account? Login Here

IDES

Bayblend® DP T88 Plus

Acrylonitrile Butadiene Styrene + PC

Glass Fiber Reinforcement, 10%

Supplied by Bayer MaterialScience AG

The technical datasheet with complete property values for Bayblend® DP T88 Plus is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
10 % GF; improved heat aging stability; easy-flow; optimized adhesion to PU foam; tensile modulus = 4500 MPa; Vicat/B 120 = 136 °C.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Africa & Middle East
  • Europe
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Features 
  • Good Flow
  • Good Heat Aging Resistance
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Molding Shrinkage
     ISO 294-4
Across Flow: 0.118 in
%
  
Flow: 0.118 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress
      
Yield
psi
 ISO 527-2/5
Break
psi
 ISO 527-2 2
Tensile Strain
      
Yield
%
 ISO 527-2/5
Break
%
 ISO 527-2 2
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180/1U
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ISO 75-2 2
66 psi
°F
  
264 psi
°F
  
Vicat Softening Temperature
      
--
°F
 ISO 306/B120
50°C/h, B (50N)
°F
 ISO 306 2
Electrical
Nominal Value
Unit
Test Method
Electric strength
V/mil
 IEC 60243-1 2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Additional Information
The values listed as Molding Shrinkage, ISO 294-4, were tested in accordance with ISO 2577.
Glass fiber content, ISO 3451-1: 10%
Molding Shrinkage, ISO 2577, Across Flow, 150x105x3mm: 0.55 to 0.75%
Molding Shrinkage, ISO 2577, Flow, 150x105x3mm: 0.3 to 0.5%
Spiral flow length, Bayer test: 355 mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® DP T88 Plus, Bayblend DP T88 Plus, Bayblend® , Bayblend, BayblendDPT88Plus, DP T 88 Plus, DP T88 Plus, DPT, T88, 88Plus, DPT88Plus, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer Euro, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, TDP
Features
Features may also be described by the following terms: Good Heat Aging Resistance, Good Flow.
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.