IDES Prospector Already have an account? Login Here

IDES

Ren Ren Shape RP 6452 Resin/Hardener

Polyurethane

Supplied by Huntsman Advanced Materials

The technical datasheet with complete property values for Ren Ren Shape RP 6452 Resin/Hardener is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
RP 6452 polyurethane Resin/Hardener is formulated to rapidly produce tough, durable prototype parts using automated dispensing equipment. Cured prototypes are thermoplastic-like in appearance and exhibit outstanding compressive and flexural strength, high impact strength and good thermal resistance. This white system permits easy pigmentation of molded parts. Prototypes weighing up to 10 pounds can be cast and demolded in 15 to 30 minutes using meter mix equipment with this fast-cure polyurethane.

APPLICATIONS: Rapid production of tough, impact resistant prototypes and parts that closely resemble thermoplastic end products. Excellent for pre-production and short production.

MIXING INSTRUCTIONS:
Reaction Ratio:
  • 80 Resin to 100 Hardener by weight
  • 67 Resin to 100 Hardener by volume

This highly reactive system is best suited for use employing a meter mix dispensing system or suitable cartridge/static mixer system. Your technical sales representative is available to discuss the requirements for dispensing this material.
Simple silicone, polyurethane or epoxy molds can be used for molding the RP 6452 system. Mold design and construction should be for pressure-free casting.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Durable
  • Fast Molding Cycle
  • Good Colorability
  • Good Compressive Strength
  • Good Mold Release
  • Good Toughness
  • High Impact Resistance
  • Medium Heat Resistance
Uses 
  • Prototyping
Appearance 
  • Clear Amber
  • Cream
  • White
Forms 
  • Liquid
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Ultimate)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Break)
psi
 ASTM D790
Compressive Modulus
psi
 ASTM D695
Compressive Strength
psi
 ASTM D695
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Glass Transition Temperature (DSC)
°F
 DSC
CLTE - Flow (-22 to 86°F)
in/in/°F
 ASTM D696
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Shelf Life
wk
  
Demold Time (77°F)
min
  
Post Cure Time (176°F)
hr
  
Additional Information
Thermoset Components - Reaction Ratio: 67 Resin to 100 Hardener by volume
Hardener Viscosity, ASTM D2393: 1600 cP
Resin Viscosity, ASTM D2393: 30 cP
Gel Time, ASTM D2471, 150 g, 77°F: 50-70 sec
Hardener Color, Visual: Cream
Mixed Color, Visual: White to Off White
The value listed as Glass Transition Temp, DSC was tested according to the ASTM D4065 standard.
Flexural Strength at Break, ASTM D790: >8400 psi
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ren Ren Shape RP 6452 Resin/Hardener, Ren Ren Shape RP 6452 ResinHardener, Ren , RenRenShapeRP6452ResinHardener, Ren Shape RP 6452 Resin, RenShapeRP6452Resin, Ren Shape RP 6452 Resin/Hardener, Ren Shape RP 6452 ResinHardener, Ren Shape RP 6452 Resin:Hardener, Ren Shape RP 6452 Resin+Hardener, Ren Shape RP 6452 Resin-Hardener, Ren Shape RP 6452 Resin_Hardener, Ren Shape RP 6452 Resin Hardener, RenShape, ShapeRP, RP6452, 6452Resin, ResinHardener, RenShapeRP6452ResinHardener, RenShapeRP6452Resin_Hardener, Polyurethane, Unspecified, Polyurethane Unspecified, PUR, Unspecified, PUR Unspecified, Polyurethane, PUR, Huntsman Adv Matl, PolyurethaneUnspecified, PURUnspecified, ShapeRen
Features
Features may also be described by the following terms: Good Toughness, Tough, Good Compressive Strength, High Impact Resistance, Medium Heat Resistance, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Mold Release, Easy Release, Good Demolding, Good Colorability.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.