IDES Prospector Already have an account? Login Here

IDES

BRALEN® FB 3-33

Low Density Polyethylene

Supplied by Slovnaft Petrochemicals, s.r.o.

The technical datasheet with complete property values for BRALEN® FB 3-33 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BRALEN FB 3-33 is a film grade of low density polyethylene. It contains slip, antiblocking, antistatic agents and antioxidant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock (1000 ppm)
  • Antioxidant
  • Antistatic
  • Slip (600 ppm)
  
Features 
  • Antiblocking
  • Antioxidant
  • Antistatic
  • Food Contact Acceptable
  • Slip
Uses 
  • Film
  • Packaging
  
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Tensile Strength
     ISO 527-3
MD: 1.6 mil, Blown Film
psi
  
TD: 1.6 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 1.6 mil, Blown Film
%
  
TD: Break, 1.6 mil, Blown Film
%
  
Dart Drop Impact (1.6 mil, Blown Film)
g
 ISO 7765-1
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Optical
Nominal Value
Unit
Test Method
Haze (1.57 mil, Blown Film)
%
 ISO 14782
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BRALEN® FB 3-33, BRALEN FB 333, BRALEN® , BRALEN, BRALENFB333, FB 3, FB 3-33, FB 333, FB 3:33, FB 3/33, FB 3+33, FB 3_33, FB 3 33, FB3, 333, FB333, FB3_33, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Slovnaft, PolyethyleneLowDensity, 3FB
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Slip, Unspecified Slip.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.