IDES Prospector Already have an account? Login Here

IDES

RABALON® SJ9400

Thermoplastic Elastomer

Supplied by Mitsubishi Chemical Performance Polymers, Inc.

The technical datasheet with complete property values for RABALON® SJ9400 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • General Purpose
Uses 
  • General Purpose
Appearance 
  • Black
  • Natural Color
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (100% Strain)
psi
 ISO 37
Tensile Stress (Break)
psi
 ISO 37
Tensile Elongation (Break)
%
 ISO 37
Tear Strength
lbf/in
 ISO 34-1
Compression Set 2 (158°F, 22.0 hr)
%
 ISO 815
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
     ISO 7619
Shore A
 
  
Shore D
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RABALON® SJ9400, RABALON SJ9400, RABALON® , RABALON, RABALONSJ9400, SJ 9400, SJ9400, Thermoplastic Elastomer, TPE, Mitsubishi Chem, ThermoplasticElastomer, 9400SJ
Notes
1Typical properties: these are not to be construed as specifications.
26 sheets (each thickness = 2mm)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.