IDES Prospector Already have an account? Login Here

IDES

TAIRILAC AG22AT

Acrylonitrile Butadiene Styrene

Supplied by Formosa Chemicals & Fibre Corporation

The technical datasheet with complete property values for TAIRILAC AG22AT is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • High Impact Resistance
  • Platable
  
Uses 
  • Automotive Exterior Trim
  • Handles
  • Knobs
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ASTM D1238, ISO 1133
200°C/5.0 kg
g/10 min
  
220°C/10.0 kg
g/10 min
  
Molding Shrinkage - Flow (73°F)
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
      
Yield, 73°F
psi
 ASTM D638
Yield, 73°F
psi
 ISO 527-2
Flexural Modulus (73°F)
psi
 ASTM D790, ISO 178
Flexural Strength (73°F)
psi
 ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
73°F, 0.250 in
ft·lb/in
 ISO 180
73°F, 0.250 in
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale, 73°F)
 
 ASTM D785, ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed, 0.500 in
°F
 ASTM D648
264 psi, Unannealed, 0.500 in Span
°F
 ISO 75-2/A
264 psi, Annealed
°F
 ASTM D648, ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/A, ASTM D1525 2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0625 in, All Colors)
 
 UL 94
UL File Number
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TAIRILAC AG22AT, TAIRILAC , TAIRILACAG22AT, AG 22 AT, AG22AT, AG22, 22AT, Acrylonitrile Butadiene Styrene, ABS, Formosa Chemicals, AcrylonitrileButadieneStyrene, 22AG
Features
Features may also be described by the following terms: High Impact Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Notes
Screw Temperature: 190 to 230°C
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.