IDES Prospector Already have an account? Login Here

IDES

Indothene HD 46GP009UV

High Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for Indothene HD 46GP009UV is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Indothene-HD grade 46GP009UV is a natural pipe extrusion grade of HDPE, produced by Hostalen Stirred Tank Heavy Diluent (STHD) Slurry process at IPCL's Gandhar Complex. It possesses bimodal molecular weight distribution, which improves processability and mechanical properties of pipe.
46GP009UV is UV stabilized grade & is suitable for producing Cable ducts for Optical fibers and other general-purpose application. The grade is designed to sustain outdoor exposure of 12 months. Designation of 46GP009UV as per IS 7328-1992 is PE EL C45 T012.

FOOD CONTACT APPLICATIONS:
This grade meets the requirements of Indian Standard IS: 10146 on "Polyethylene for its safe use in contact with foodstuffs, pharmaceutical and drinking water". The level of antioxidant in 46GP009UV is not more than 0.3% by mass of the resin. The antioxidants used in the grade are covered in IS: 10141.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  
Additive 
  • UV Stabilizer
Features 
  • Food Contact Acceptable
  • Good UV Resistance
  
Uses 
  • Fiber Optic Cable
  • General Purpose
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance (50°F, 10% Igepal, Injection Molded, F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.126 in, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2
     ASTM D638
Yield, 0.126 in, Injection Molded
%
  
Break, 0.126 in, Injection Molded
%
  
Additional Information
OIT, ASTM D3895, Cu pan, 200°C: >30 min
Tensile Elongation at Break, ASTM D 638, Type I, 3.2 mm: >350%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Indothene HD 46GP009UV, Indothene HD , IndotheneHD46GP009UV, IndotheneHD, HD 46 GP 009 UV, HD46GP009UV, HD46, HD, 46 GP 009 UV, 46GP009UV, 46GP, GP009, 009UV, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Reliance, PolyethyleneHighDensity, GP46, 46HD
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Fiber Optic Cable, Fiber Optics.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.