IDES Prospector Already have an account? Login Here

IDES

Indothene LL LL 24FA030

Linear Low Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for Indothene LL LL 24FA030 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Indothene-LL LL24FA030 is a linear low-density polyethylene produced by gas-phase fluidised bed process using butene as comonomer. It is specially designed for low voltage insulation compound for silane cross-linking process by way optimal co monomer insertion. The grade is designed with optimum level of antioxidants and does not contain slip or anitblock.

FOOD CONTACT APPLICATIONS :
This grade shall meet the requirements of Indian Standard IS-10146-1982 on "Polyethylene for its safe use in contact with food stuffs, pharmaceuticals and drinking water". It shall also conform to the positive list of constituents as approved in IS: 10141:1982. The grade may also comply with FDA regulation: CFR title 21, 177.1520, Olefin polymer .
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Butene Comonomer
  • Crosslinkable
  • Food Contact Acceptable
  
Uses 
  • Blending
  • Film
  • Wire & Cable Applications
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 0.126 in)
psi
 ASTM D638
Tensile Elongation (Break, 0.126 in)
%
 ASTM D638
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Indothene LL LL 24FA030, Indothene LL , IndotheneLLLL24FA030, IndotheneLL, LLLL 24 FA 030, LLLL 24FA030, LLLL24, LL, LL 24 FA 030, LLLL24FA030, LL 24FA030, LL24, 24FA, FA030, LL24FA030, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Reliance, PolyethyleneLinearLowDensity, 24LL, 24LLLL
Features
Features may also be described by the following terms: Butene Comonomer.
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.