IDES Prospector Already have an account? Login Here

IDES

Koylene ADL-CP AER003N

Polypropylene Copolymer

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for Koylene ADL-CP AER003N is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Koylene ADL-CP is the brand name of polypropylene Copolymer spheribeads with external additivation manufactured and marketed by IPCL from its facility at Baroda complex through Spheripol/ Addipol technology adopting the process know-how of M/S Basell,The Netherlands .
Koylene ADL-CP AER003N is a Random Copolymer grade manufactured to produce Pipes for Pressure applications, Sheets for Thermoforming and Extrusion Blow moulding

FOOD CONTACT APPLICATIONS: This grade meets with the requirements of Indian Standard IS: 10910 on "Specifications for Polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water". Additives incorporated in this grade conform to the positive list of constituents as prescribed in IS 10909.The grade and the additives also comply with the FDA : CFR Title 21,177.1520, Olefin polymers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Copolymer
  • Food Contact Acceptable
  
Uses 
  • Blow Molding Applications
  • Piping
  • Sheet
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Spheres
Processing Method 
  • Extrusion Blow Molding
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
230°C/2.16 kg
g/10 min
  
230°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.126 in, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2
     ASTM D638
Yield, 0.126 in, Injection Molded
%
  
Break, 0.126 in, Injection Molded
%
  
Flexural Modulus 2 (0.126 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, 0.126 in, Injection Molded)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
Tensile Elongation @ Brk, Injection Molded, Type I, 3.20 mm: > 500%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Koylene ADL-CP AER003N, Koylene ADLCP AER003N, Koylene ADL-CP , Koylene ADLCP, Koylene ADL:CP, Koylene ADL/CP, Koylene ADL+CP, Koylene ADL_CP, Koylene ADL CP, KoyleneADLCPAER003N, KoyleneADLCP, ADL CPAER 003 N, KoyleneADL_CP, ADL-CPAER003N, ADLCPAER003N, ADL:CPAER003N, ADL/CPAER003N, ADL+CPAER003N, ADL_CPAER003N, ADL CPAER003N, ADLCPAER, CPAER003, ADL-CP, ADLCP, ADL:CP, ADL/CP, ADL+CP, ADL_CP, ADL CP, AER 003 N, AER003N, AER003, 003N, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Reliance, PolypropyleneCopolymer, PPCopolymer, 003AER, CPAERADL, CPADL
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Type I
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.