IDES Prospector Already have an account? Login Here

IDES

Koylene ADL AM650N

Polypropylene Homopolymer

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for Koylene ADL AM650N is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Koylene ADL AM650N is polypropylene homopolymer suitable for injection moulded products requiring appropriate balance of toughness and rigidity. Its ease of mouldability, good mechanical and thermal properties make it a material of choice.

FOOD CONTACT APPLICATIONS: This grade meets with the requirements of Indian Standard IS: 10910 on "Specifications for Polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water". The grade also complies with FDA regulation : CFR TITLE 21 - 177.1520, on olefin polymers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Moldability
  • Good Toughness
  • High Isotactic
  • High Rigidity
  • Homopolymer
Uses 
  • Closures
  • Media Packaging
  • Thin-walled Parts
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Spheres
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.126 in, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Yield, 0.126 in, Injection Molded)
%
 ASTM D638
Flexural Modulus 2 (0.126 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Koylene ADL AM650N, Koylene ADL , KoyleneADLAM650N, KoyleneADL, ADLAM 650 N, ADLAM650N, ADLAM650, ADL, AM 650 N, AM650N, AM650, 650N, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Reliance, PolypropyleneHomopolymer, PPHomopolymer, 650AM, 650ADLAM
Features
Features may also be described by the following terms: High Isotactic, High Isotacticity, Good Moldability, High Rigidity, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Media Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.