IDES Prospector Already have an account? Login Here

IDES

Koylene ADL AS030NS

Polypropylene Homopolymer

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for Koylene ADL AS030NS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Koylene ADL is the brand name of polypropylene Homopolymer spheribeads with external additivation manufactured and marketed by IPCL from its facility at Baroda complex through Spheripol / Addipol technology adopting the process know-how of M/s. Basell, The Netherlands.
Koylene ADL AS030NS is a homopolymer grade especially formulated to produce extrusion products and speciality compounds. As compared to the regular grade Koylene AS030N, this grade is richer in additive contents for high temperature processing and possesses excellent thermo-oxidative stability. Extra addition of antioxidants for preparation of compounds may not be needed when this grade is used. Narrow particle size distribution and somewhat higher bulk density than AS030N can offer advantages of throughput. Its unique powder like morphology coupled with relatively easy processing on extrusion and downstream equipment makes it a grade of choice.

FOOD CONTACT APPLICATIONS: This grade meets with the requirements of Indian Standard IS: 10910 on "Specifications for Polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water".
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Thermal Stability
  • Homopolymer
Uses 
  • Masterbatch
  • Sheet
  • Strapping
  • Twine
  
Appearance 
  • Natural Color
Forms 
  • Spheres
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.126 in, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Yield, 0.126 in, Injection Molded)
%
 ASTM D638
Flexural Modulus 2 (0.126 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Koylene ADL AS030NS, Koylene ADL , KoyleneADLAS030NS, KoyleneADL, ADLAS 030 NS, ADLAS030NS, ADLAS030, ADL, AS 030 NS, AS030NS, AS030, 030NS, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Reliance, PolypropyleneHomopolymer, PPHomopolymer, 030AS, 030ADLAS
Features
Features may also be described by the following terms: Good Thermal Stability.
Notes
1Typical properties: these are not to be construed as specifications.
2Type I
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.