IDES Prospector Already have an account? Login Here

IDES

Koylene CP MI3535

Polypropylene Impact Copolymer

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for Koylene CP MI3535 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Koylene-CP grade MI3535 is a polypropylene impact copolymer, manufactured by copolymerising propylene with ethylene. The ethylene - propylene elastomeric phase in the PP impact copolymer improves the impact strength of the products which is retained even at sub-zero temperatures. Koylene-CP grade MI3535 is specially formulated for high speed extrusion compression moulding process. The grade possesses good toughness and the articles moulded can withstand a continuous service temperature of up to 90oC.

FOOD CONTACT APPLICATIONS: This grade meets with the requirements of Indian Standard IS: 10910 on "Specifications for Polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water". The grade also complies with FDA regulation: CFR TITLE 21 - 177.1520, on olefin polymers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Toughness
  • Impact Copolymer
  • Low Temperature Impact Resistance
  
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Compression Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.126 in, Injection Molded)
psi
 ASTM D638
Tensile Elongation 2 (Yield, 0.126 in, Injection Molded)
%
 ASTM D638
Flexural Modulus 2 (0.126 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Koylene CP MI3535, Koylene CP , KoyleneCPMI3535, KoyleneCP, CPMI 3535, CPMI3535, CP, MI 3535, MI3535, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, Reliance, PolypropyleneImpactCopolymer, PPImpactCopolymer, 3535MI, 3535CPMI
Features
Features may also be described by the following terms: Impact Copolymer, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Toughness, Tough.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Extrusion Notes
Nozzle Temperature: 250°C
Mold Temperature: as per process requirements
Notes
1Typical properties: these are not to be construed as specifications.
2Type I
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.