IDES Prospector Already have an account? Login Here

IDES

TECDUR® HZ - 5223

Polybutylene Terephthalate

Supplied by LEIS Polytechnik - polymere Werkstoffe GmbH

The technical datasheet with complete property values for TECDUR® HZ - 5223 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • High Impact Resistance
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1e
Charpy Unnotched Impact Strength
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Melting Temperature (DSC)
°F
 ISO 3146
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Additional Information
All ISO properties were tested in accordance with DIN test standards with the exception of HDT B, ISO 75.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TECDUR® HZ - 5223, TECDUR HZ 5223, TECDUR® , TECDUR, TECDURHZ5223, HZ, HZ - 5223, HZ 5223, HZ : 5223, HZ / 5223, HZ + 5223, HZ _ 5223, HZ 5223, HZ5223, HZ_5223, Polybutylene Terephthalate, PBT, Polyester, Leis Polytechnik, PolybutyleneTerephthalate, 5223HZ
Features
Features may also be described by the following terms: High Impact Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.