IDES Prospector Already have an account? Login Here

IDES

ASTAMID™ KB3EG5

Polyamide 6

Glass Fiber Reinforcement, 25%

Supplied by Marplex Australia Pty. Ltd.

The technical datasheet with complete property values for ASTAMID™ KB3EG5 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ASTAMID™ KB3EG5 is a flame retardant, low smoke, 25% Glass fibre filled Polyamide 6 (PA 6) designed for use in applications where UL94 V-0 flammibility rating and very high modulus are required. Typical Values for KB3EG5 were obtained on dry specimens as moulded. All test resuts were obtained using uncoloured material.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 25% Filler by Weight
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • High Stiffness
  • Low Smoke Emission
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2 (0.126 in)
psi
 ASTM D638
Tensile Strength 2 (0.126 in)
psi
 ASTM D638
Tensile Elongation 2 (Break, 0.126 in)
%
 ASTM D638
Flexural Modulus 3 (0.126 in)
psi
 ASTM D790
Flexural Strength 3 (0.126 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.126 in)
°F
 ASTM D648
CLTE - Flow
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.118 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ASTAMID™ KB3EG5, ASTAMID KB3EG5, ASTAMID™ , ASTAMID, ASTAMIDKB3EG5, KB 3 EG 5, KB3EG5, KB3, 3EG, EG5, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Marplex, Polyamide6, Nylon6, 3KB
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Low Smoke Emission, High Stiffness.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Clamp Tonnage
tons/in²
  
Injection Notes
Drying Time (Opened Bag): >12 hr
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.11 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.