IDES Prospector Already have an account? Login Here

IDES

Bicor™ 100 LTSC

Oriented Polypropylene Film

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for Bicor™ 100 LTSC is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bicor LTSC is a two-side coated OPP film, which is designed for use in high-speed or demanding horizontal, fin seal, packaging applications. The low-temperature seal coating (LTSC) delivers a low seal initiation temperature. LTSC provides a forgiving, wide operating range for applications where accurate heat control is a problem, or dwell times vary because of frequent machine speed changes. LTSC's acrylic surface is excellent for surface printing and provides good aroma barrier.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
  • South America
Features 
  • Acrylic Coated
  • Flavor & Aroma Barrier
  • Humidity Resistant
  • In Lamination Lap Sealable
  • LTS Coated
  • Very Broad Seal Range
Uses 
  • HFFS Flexible Packaging
Appearance 
  • Clear/Transparent
Forms 
  • Film
Processing Method 
  • Inner Web Adhesive Lamination
  • Solvent Flexographic Printing
  • Solvent Rotogravure Printing
  • Surface Print Unsupported
  • Water-based Flexographic Printing
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Acrylic/Acrylic)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D882
MD: Break, 2.0 in Jaw Separation 3
psi
  
TD: Break, 2.0 in Jaw Separation
psi
  
Water Vapor Transmission Rate 4 (100°F, 90% RH)
g/100 in²/24 hr
 ASTM F1249
Optical
Nominal Value
Unit
Test Method
Gloss (45°, Acrylic Surface)
 
 ASTM D2457
Haze
%
 ASTM D1003
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: Bicor™ 100 LTSC, Bicor 100 LTSC, Bicor™ , Bicor, Bicor100LTSC, 100 LTSC, 100LTSC, Oriented Polypropylene Film, OPP Film, Polypropylene, PP, ExxonMobil, OrientedPolypropyleneFilm, OPPFilm, LTSC100
Features
Features may also be described by the following terms: Flavor & Aroma Barrier, Flavor Barrier, Aroma Barrier, Flavor and Aroma Barrier, Acrylic Coated, LTS Coated, Lamination Lap Sealable, Very Broad Seal Range.
Uses
Uses may also be described by the following terms: Flexible Packaging HFFS.
Notes
1Typical properties: these are not to be construed as specifications.
220 in/min
3Dimensional Stability and Tensile Strength values are reported for uncoated base film.
4Tested at 100 °F (38 °C)/100% RH, then calculated to 90% RH with .90 multiplier.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.