IDES Prospector Already have an account? Login Here

IDES

Bicor™ 18MB090

Oriented Polypropylene Film

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for Bicor™ 18MB090 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Biaxially oriented polypropylene film metallizable on one side, with a slip controlled broad seal range surface on the other side. Once metallized, film is designed to be used in laminates as the inner web and is suitable for HFFS and VFFS applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Features 
  • In Lamination Lap Sealable
Appearance 
  • Clear/Transparent
Forms 
  • Film
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Untreated Surface)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Elastic Modulus - MD
psi
 ASTM D882
Elastic Modulus - TD
psi
 ASTM D882
Tensile Strength 2
     ASTM D882
MD: Break, 4.9 in Jaw Separation
psi
  
TD: Break, 4.9 in Jaw Separation
psi
  
Tensile Elongation 2
     ASTM D882
MD: Break, 4.9 in Jaw Separation
%
  
TD: Break, 4.9 in Jaw Separation
%
  
Water Vapor Transmission Rate
     ASTM F1249
73°F, 85% RH
g/100 in²/24 hr
  
77°F, 75% RH
g/100 in²/24 hr
  
100°F, 90% RH 3
g/100 in²/24 hr
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: Bicor™ 18MB090, Bicor 18MB090, Bicor™ , Bicor, Bicor18MB090, 18 MB 090, 18MB090, 18MB, MB090, Oriented Polypropylene Film, OPP Film, Polypropylene, PP, ExxonMobil, OrientedPolypropyleneFilm, OPPFilm, MB18
Features
Features may also be described by the following terms: Lamination Lap Sealable.
Notes
1Typical properties: these are not to be construed as specifications.
27.9 in/min
3Tested at 100 °F (38 °C)/100% RH, then calculated to 90% RH with .90 multiplier.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.