IDES Prospector Already have an account? Login Here

IDES

Oppalyte™ 50 HM-2

Oriented Polypropylene Film

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for Oppalyte™ 50 HM-2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Oppalyte 50 HM-2 is a white opaque OPP film with a proprietary cavitated core. It is designed for cold seal applications and is used as a surface print monoweb.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
  • South America
Features 
  • Light Barrier
  • Moisture Barrier
  
Uses 
  • HFFS Flexible Packaging
Appearance 
  • White
Forms 
  • Film
Processing Method 
  • Cold Seal Adhesive
  • Inner Web Adhesive Lamination
  • Inner Web Extrusion Lamination
  • Solvent Flexographic Printing
  • Solvent Rotogravure Printing
  • Surface Print Unsupported
  • Water-based Flexographic Printing
Films
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D882
MD: Break, 2.0 in Jaw Separation
psi
  
TD: Break, 2.0 in Jaw Separation
psi
  
Water Vapor Transmission Rate 3 (100°F, 90% RH)
g/100 in²/24 hr
 ASTM F1249
Optical
Nominal Value
Unit
Test Method
Gloss (45°, Print Surface)
 
 ASTM D2457
Opacity
%
 ASTM D589
Transmittance
%
 ASTM D1003
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: Oppalyte™ 50 HM-2, Oppalyte 50 HM2, Oppalyte™ , Oppalyte, Oppalyte50HM2, 50 HM, 50 HM-2, 50 HM2, 50 HM:2, 50 HM/2, 50 HM+2, 50 HM_2, 50 HM 2, 50HM, HM2, 50HM2, 50HM_2, Oriented Polypropylene Film, OPP Film, Polypropylene, PP, ExxonMobil, OrientedPolypropyleneFilm, OPPFilm, HM50
Features
Features may also be described by the following terms: Light Barrier, Moisture Barrier.
Uses
Uses may also be described by the following terms: Flexible Packaging HFFS.
Notes
1Typical properties: these are not to be construed as specifications.
220 in/min
3Tested at 100 °F (38 °C)/100% RH, then calculated to 90% RH with .90 multiplier.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.