IDES Prospector Already have an account? Login Here

IDES

Oppalyte™ 42MH647

Oriented Polypropylene Film

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for Oppalyte™ 42MH647 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Super white opaque, modified higher density, biaxially oriented polypropylene film, acrylic coated two sides. This extreme opaque and stiff film is ideal for single web requirements.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Features 
  • Acrylic Coated
  • Flavor & Aroma Barrier
  • In Lamination Lap Sealable
  • Light Barrier
  
Uses 
  • Box Overwrap Flexible Packaging
  • HFFS Flexible Packaging
  • Pre-made Bags - Flexible Packaging
  • VFFS Flexible Packaging
  
Appearance 
  • White
Forms 
  • Film
Processing Method 
  • Cold Seal Adhesive
  • Inner Web Adhesive Lamination
  • Outer Web Adhesive Lamination
  • Solvent Flexographic Printing
  • Solvent Rotogravure Printing
  • Surface Print Unsupported
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Both Sides)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Elastic Modulus - MD
psi
 ASTM D882
Elastic Modulus - TD
psi
 ASTM D882
Tensile Strength 2
     ASTM D882
MD: Break, 4.9 in Jaw Separation
psi
  
TD: Break, 4.9 in Jaw Separation
psi
  
Tensile Elongation 2
     ASTM D882
MD: Break, 4.9 in Jaw Separation
%
  
TD: Break, 4.9 in Jaw Separation
%
  
Oxygen Transmission Rate 3 (73°F, 0% RH)
cm³/100 in²/24 hr
 ASTM D3985
Oxygen Transmission Rate (Wet) (73°F, 75% RH)
cm³/100 in²/24 hr
 ASTM F1927
Water Vapor Transmission Rate
     ASTM F1249
73°F, 85% RH
g/100 in²/24 hr
  
100°F, 90% RH 4
g/100 in²/24 hr
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Transmittance
%
 ASTM D1003
Whiteness Index
 
 ASTM E313
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: Oppalyte™ 42MH647, Oppalyte 42MH647, Oppalyte™ , Oppalyte, Oppalyte42MH647, 42 MH 647, 42MH647, 42MH, MH647, Oriented Polypropylene Film, OPP Film, Polypropylene, PP, ExxonMobil, OrientedPolypropyleneFilm, OPPFilm, MH42
Features
Features may also be described by the following terms: Flavor & Aroma Barrier, Flavor Barrier, Aroma Barrier, Flavor and Aroma Barrier, Light Barrier, Acrylic Coated, Lamination Lap Sealable.
Uses
Uses may also be described by the following terms: Flexible Packaging Box Overwrap, Flexible Packaging HFFS, Flexible Packaging Pre-made Bags, Flexible Packaging Premade Bags, Flexible Packaging VFFS.
Notes
1Typical properties: these are not to be construed as specifications.
27.9 in/min
3Sample dimensions and conditioning vary due to differences in equipment design.
4Tested at 100 °F (38 °C)/100% RH, then calculated to 90% RH with .90 multiplier.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.