IDES Prospector Already have an account? Login Here

IDES

MDI EVA CF-250 A

Ethylene Vinyl Acetate Copolymer

Supplied by Modern Dispersions, Inc.

The technical datasheet with complete property values for MDI EVA CF-250 A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CF-250 A can be molded and extruded into a variety of items where flexibility and permanent static shielding is required. Typically, small boxes and containers are injection molded and desk and floor mats are extruded from CF- 250 A. CF-250 A meets the static decay specifications of MIL-81705B and NFPA code 56A.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Conductive
  • Good Flexibility
  
Uses 
  • Containers
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
 
 ASTM D256
Unnotched Izod Impact
 
 ASTM D256
Gardner Impact
 
 ASTM D3029
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Additional Information
The value listed as Gardner Impact ASTM D3029, was tested in accordance with ASTM D1709.
The value listed as Volume Resistivity ASTM D257, was tested in accordance with ASTM D991.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MDI EVA CF-250 A, MDI EVA CF250 A, MDI EVA , MDIEVACF250A, MDIEVA, CF, EVACF-250 A, EVACF250 A, EVACF:250 A, EVACF/250 A, EVACF+250 A, EVACF_250 A, EVACF 250 A, EVACF250, EVACF, EVACF250A, CF-250 A, CF250 A, CF:250 A, CF/250 A, CF+250 A, CF_250 A, CF 250 A, CF250, 250A, EVACF_250A, CF250A, CF_250A, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Modern Disp, EthyleneVinylAcetateCopolymer, 250CF, 250EVACF
Features
Features may also be described by the following terms: Good Flexibility, Flexible.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): MIL (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.