IDES Prospector Already have an account? Login Here

IDES

MDI PE CS-320

High Density Polyethylene

Supplied by Modern Dispersions, Inc.

The technical datasheet with complete property values for MDI PE CS-320 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CS-320 is a high-density polyethylene conductive compound. It meets the static decay rate specifications of MIL-81705B and NFPA Code 56A.

CS-320 is typically used in sheet extrusion. The sheets produced from it can easily be thermoformed into tote boxes, trays and other items where static shielding is required.
  • Excellent Conductivity
  • High Chemical Resistance
  • Good processability
  • Very Good Surface Finish
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Conductive
  • Good Chemical Resistance
  • Good Processability
  • Good Surface Finish
  
Uses 
  • Support Trays
  • Tool/Tote Box
  
Agency Ratings 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Sheet Extrusion
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/10.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (0.125 in)
 
 ASTM D256
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Additional Information
Moisture Content (as packed), MDI: <0.2 %
The value listed as Volume Resistivity ASTM D257, was tested in accordance with ASTM D991.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MDI PE CS-320, MDI PE CS320, MDI PE , MDIPECS320, MDIPE, CS, PECS-320, PECS320, PECS:320, PECS/320, PECS+320, PECS_320, PECS 320, PECS, CS-320, CS320, CS:320, CS/320, CS+320, CS_320, CS 320, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Modern Disp, PolyethyleneHighDensity, 320CS, 320PECS
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Processability, Easy Processing, Good Surface Finish.
Uses
Uses may also be described by the following terms: Tool Box, Tote Box, Tool/Tote Box, Support Trays.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): MIL (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.