IDES Prospector Already have an account? Login Here

IDES

MDI PP PP-222

Polypropylene

Supplied by Modern Dispersions, Inc.

The technical datasheet with complete property values for MDI PP PP-222 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PP-222 is a permanently conductive, high impact compound which can be molded and extruded into products where electrostatic shielding property is required. Typically, tote boxes, IC chip carriers
and other containers.

PP-222 meets the static decay rate specifications of MIL-81705B and NFPA code 56A.
  • Excellent Conductivity
  • High Impact Resistance
  • Good Rigidity
  • Excellent Surface Smoothness
  • Easy Processability
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Conductive
  • Good Processability
  • Good Surface Finish
  • High Impact Resistance
  • High Rigidity
Uses 
  • Containers
  • Tool/Tote Box
  
Agency Ratings 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
  • Profile Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/10.0 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Gardner Impact
in·lb
 ASTM D3029
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity (73°F)
ohm·cm
 ASTM D257
Additional Information
The value listed as Gardner Impact ASTM D3029, was tested in accordance with ASTM D1709.
Surface Resistivity, ASTM D257, on tapes @ 73°F: 100 ohms
Volume Resistivity, ASTM D991, on plaque @ 73°F: 50 ohm-cm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MDI PP PP-222, MDI PP PP222, MDI PP , MDIPPPP222, MDIPP, PP, PPPP-222, PPPP222, PPPP:222, PPPP/222, PPPP+222, PPPP_222, PPPP 222, PPPP, PP-222, PP222, PP:222, PP/222, PP+222, PP_222, PP 222, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, Modern Disp, PolypropyleneUnspecified, PPUnspecified, 222PP, 222PPPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Impact Resistance, Good Processability, Easy Processing, High Rigidity, Good Surface Finish.
Uses
Uses may also be described by the following terms: Tool Box, Tote Box, Tool/Tote Box.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): MIL (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.