IDES Prospector Already have an account? Login Here

IDES

REALSTAT PS-700

High Impact Polystyrene

Supplied by Modern Dispersions, Inc.

The technical datasheet with complete property values for REALSTAT PS-700 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
REALSTAT PS-700 is a permanently static dissipative, impact resistant polystyrene compound which can be extruded and molded into products where static dissipative property is required.
REALSTAT PS-700 meets the static decay rate specifications of MIL-81705B and NFPA code 56A.
  • Permanently Static Dissipation
  • Natural Color
  • Impact Resistance
  • Excellent Surface Smoothness
  • Easy Processability
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Antistatic
  • Good Impact Resistance
  • Good Processability
  • Good Surface Finish
  
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
  • Sheet Extrusion
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/10.0 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Additional Information
Surface Resistivity, ASTM D257, on chips @ 73°F: 1E+11 to 2E+11
Surface Resistivity, ASTM D257, on tapes @ 73°F: 5E+10
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: REALSTAT PS-700, REALSTAT PS700, REALSTAT , REALSTATPS700, PS, PS-700, PS700, PS:700, PS/700, PS+700, PS_700, PS 700, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, Modern Disp, PolystyreneHighImpact, PSHIPS, 700PS
Features
Features may also be described by the following terms: Good Impact Resistance, Good Processability, Easy Processing, Good Surface Finish.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): MIL (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.