IDES Prospector Already have an account? Login Here

IDES

EMERGE™ PC 4902

Advanced Resin

Glass Fiber Reinforcement, 20%

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ PC 4902 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE™ PC 4902 is a 20% glass fiber reinforced high flow ignition resistant polycarbonate resin. This grade provides flame rating UL 94 V0 at 1.6mm without the use of halogenated additives. It has superior processability and is ideal for structural frame components which are moving towards thinner wall sections.

Main Characteristics:
  • UL 94 V0 at 1.6 mm
  • Good Flow
  • Does not contain halogenated additives

Applications:
  • LCD Back Light Unit Frame Components
  • Internal structural parts of Printers, Scanners, Copiers, Multifunction Office Automation Machines
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Additive 
  • Flame Retardant
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 0.126 in, Injection Molded)
psi
 ASTM D638
Flexural Modulus (0.126 in, Injection Molded)
psi
 ASTM D790
Flexural Strength (0.126 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.126 in, Injection Molded)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
CLTE - Flow
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 2 (0.0630 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ PC 4902, EMERGE PC 4902, EMERGE™ , EMERGE, EMERGEPC4902, PC 4902, PC4902, Polycarbonate, PC, Styron, 4902PC
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.