LEIS PPA GF 30 Leis Polytechnik Polyphthalamide (Glass Fiber Reinforcement, 30%)

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 30% Filler by Weight
Forms	Pellets

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage - Flow		--	%	ISO 294-4
Water Absorption				ISO 62
Saturation, 73°F		--	%
Equilibrium, 73°F, 50% RH		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus				ISO 527-2
73°F			psi
194°F			psi
248°F			psi
Tensile Stress				ISO 527-2
Break, 73°F			psi
Break, 194°F			psi
Break, 248°F			psi
Tensile Strain (Break, 73°F)		--	%	ISO 527-2
Flexural Modulus (73°F)			psi	ISO 178
Flexural Strength (73°F)			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)		--	ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)		--	ft·lb/in²	ISO 179
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
CLTE - Flow		--	in/in/°F	ISO 11359-2
Thermal Conductivity		--	Btu·in/hr/ft²/°F	ISO 8302
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity		--	ohms	ASTM D257
Comparative Tracking Index		--	V	IEC 60112
Electric Strength (0.0787 in)		--	V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (0.0630 in)		--		UL 94
Additional Information
Dry	The value listed as Molding Shrinkage ISO 294-4, was tested in accordance with S.O.P. methods. The value listed as Coefficient of Linear Thermal Expansion, Flow ISO 11359-1-2, was tested in accordance with ISO 7991.
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: LEIS PPA GF 30, LEIS , LEISPPAGF30, PPA GF 30, PPAGF, GF30, PPAGF30, Polyphthalamide, PPA, Polyamide, Nylon, Leis Polytechnik, GFPPA
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: LEIS PPA GF 30, LEIS , LEISPPAGF30, PPA GF 30, PPAGF, GF30, PPAGF30, Polyphthalamide, PPA, Polyamide, Nylon, Leis Polytechnik, GFPPA

Notes

¹Typical properties: these are not to be construed as specifications.

LEIS PPA GF 30

Polyphthalamide

Glass Fiber Reinforcement, 30%

Supplied by LEIS Polytechnik - polymere Werkstoffe GmbH