TRIBOCOMP® PA6 TS9 Epic Polymers Polyamide 6

Product Description
Bearing Grade
General
Material Status	Commercial: Active
Availability	Europe
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage - Flow		%	ISO 294-4
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2
Tensile Stress (Break, 73°F)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus (73°F)		psi	ISO 178
Flexural Strength (73°F)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
CLTE - Flow (73°F)		in/in/°F	ISO 11359-2
Thermal Conductivity		Btu·in/hr/ft²/°F	ISO 8302
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	ASTM D257
Comparative Tracking Index		V	IEC 60112
Electric Strength (0.0787 in)		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Additional Information
The value listed as Molding Shrinkage ISO 294-4, was tested in accordance with S.O.P. methods. The value listed as Coefficient of Linear Thermal Expansion, Flow ISO 11359-1-2, was tested in accordance with ISO 7991.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TRIBOCOMP® PA6 TS9, TRIBOCOMP PA6 TS9, TRIBOCOMP® , TRIBOCOMP, TRIBOCOMPPA6TS9, PA 6 TS 9, PA6 TS9, PA6, 6TS, TS9, PA6TS9, Polyamide 6, Nylon 6, Polyamide, Nylon, Epic Polymers, Polyamide6, Nylon6, 6PA
Generic Name
Generic Name may also be described by the following terms: PA6.

Notes

¹Typical properties: these are not to be construed as specifications.

TRIBOCOMP® PA6 TS9

Polyamide 6

Supplied by EPIC Polymers Ltd.