IDES Prospector Already have an account? Login Here

IDES

TRIBOCOMP® PA6.12 GF20 TS4

Polyamide 612

Glass Fiber Reinforcement, 20%

Supplied by EPIC Polymers Ltd.

The technical datasheet with complete property values for TRIBOCOMP® PA6.12 GF20 TS4 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Tribosystem 4
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow
%
 ISO 294-4
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ISO 527-2
73°F
psi
  
194°F
psi
  
Tensile Stress
     ISO 527-2
Break, 73°F
psi
  
Break, 194°F
psi
  
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE - Flow (73°F)
in/in/°F
 ISO 11359-2
Thermal Conductivity
Btu·in/hr/ft²/°F
 ISO 8302
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 ASTM D257
Comparative Tracking Index
V
 IEC 60112
Electric Strength (0.0787 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Additional Information
The value listed as Molding Shrinkage ISO 294-4, was tested in accordance with S.O.P. methods.
The value listed as Coefficient of Linear Thermal Expansion, Flow ISO 11359-1-2, was tested in accordance with ISO 7991.
Wear Factor, ASTM D3702, 23°C: 7
Static cof, ASTM D3702, 23°C: 0.12
Dynamic cof, ASTM D3702, 23°C: 0.15
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TRIBOCOMP® PA6.12 GF20 TS4, TRIBOCOMP PA612 GF20 TS4, TRIBOCOMP® , TRIBOCOMP, TRIBOCOMPPA612GF20TS4, PA 6 12 GF 20 TS 4, PA6.12 GF20 TS4, PA612 GF20 TS4, PA6, 612, 12GF, GF20, 20TS, TS4, PA612GF20TS4, Polyamide 612, Nylon 612, Polyamide, Nylon, pa612, Epic Polymers, Polyamide612, Nylon612, 6PA
Generic Name
Generic Name may also be described by the following terms: PA612, PA6/12.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.