IDES Prospector Already have an account? Login Here

IDES

FACTOR® PP LGF30 EP

Polypropylene

Long Glass Fiber, 30%

Supplied by FACT, a Ravago Group Company

The technical datasheet with complete property values for FACTOR® PP LGF30 EP is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EP Technology
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Long Glass Fiber, 30% Filler by Weight
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow
%
 ISO 294-4
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ISO 527-2
73°F
psi
  
194°F
psi
  
Tensile Stress
     ISO 527-2
Break, 73°F
psi
  
Break, 194°F
psi
  
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus
     ISO 178
73°F
psi
  
194°F
psi
  
Flexural Strength
     ISO 178
194°F
psi
  
73°F
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE - Flow
in/in/°F
 ISO 11359-2
Thermal Conductivity
Btu·in/hr/ft²/°F
 ISO 8302
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Comparative Tracking Index
V
 IEC 60112
Electric Strength (0.0787 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Additional Information
The value listed as Molding Shrinkage, ISO 294-4, Flow was tested according to the S.O.P standard.
The value listed as Coefficient of Linear Thermal Expansion, ISO 11359, Flow was tested according to the ISO 7991 standard.
Related Terminology
This supplier and product may also be known by these terms: FACT GmbH

Product names can be difficult to match. You may have searched any one of these terms to find this product: FACTOR® PP LGF30 EP, FACTOR PP LGF30 EP, FACTOR® PP , FACTOR PP, FACTORPPLGF30EP, FACTORPP, PPLGF 30 EP, PPLGF30 EP, PPLGF30, PP, LGF 30 EP, PPLGF30EP, LGF30 EP, LGF30, 30EP, LGF30EP, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, FACT, PolypropyleneUnspecified, PPUnspecified, 30LGF, 30PPLGF
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.