IDES Prospector Already have an account? Login Here

IDES

apifive® DP1358/3/430

Polyolefin

Supplied by API SpA

The technical datasheet with complete property values for apifive® DP1358/3/430 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Crosslinkable
  • Good Flexibility
  
Uses 
  • Footwear
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Elastomers
Nominal Value
Unit
Test Method
Tear Strength
lbf/in
 ASTM D624
Compression Set
     ASTM D395
73°F, 24.0 hr
%
  
122°F, 6.00 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, 15 sec)
 
 ASTM D2240
Additional Information
Abrasion Resistance, DIN 53515, 10 N: 185 mm³
Heat Stability, API Method, 24 hr, 70°C: 6 % Shrinkage
Heat Stability, API Method, 40 hr, 70°C: 2.5% Shrinkage
Hardness, Asker C, 15 sec: 62
Linear Expansion: 1.2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: apifive® DP1358/3/430, apifive DP13583430, apifive® , apifive, apifiveDP13583430, DP 1358, DP 1358 3 430, DP1358/3/430, DP13583430, DP1358:3:430, DP1358+3+430, DP1358-3-430, DP1358_3_430, DP1358 3 430, DP1358, 13583, 3430, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, API, PolyolefinUnspecified, 1358DP
Features
Features may also be described by the following terms: Good Flexibility, Flexible.
Injection
Nominal Value
Unit
 
Hopper Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Screw L/D Ratio
 
  
Injection Notes
Injection Speed: 6-15 g/sec
Mold in Aluminum
Cycle Time: 5 to 7 min
Free nozzle (without valve)
Max locking pressure: 20 MPa
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.