IDES Prospector Already have an account? Login Here

IDES

Glastic® SLC-2000

Thermoset Polyester

Supplied by Bulk Molding Compounds, Inc.

The technical datasheet with complete property values for Glastic® SLC-2000 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Appearance 
  • Black
Forms 
  • BMC - Bulk Molding Compound
Processing Method 
  • Compression Molding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Modulus
     ASTM D790
Compression Molded
psi
  
Injection Molded
psi
  
Flexural Strength
     ASTM D790
Compression Molded
psi
  
Injection Molded
psi
  
Compressive Strength
psi
 ASTM D695
Shear Strength
psi
 ASTM D732
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
Compression Molded
ft·lb/in
  
Injection Molded
ft·lb/in
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Dielectric Strength 2 (0.125 in)
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
60 Hz
 
  
1 MHz
 
  
Dissipation Factor
     ASTM D150
60 Hz
 
  
1 MHz
 
  
Arc Resistance
sec
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
UL File Number
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Additional Information
Permittivity, ASTM D150, 60 Hz, Condition A: 7.11
Permittivity, ASTM D150, 60 Hz, Condition D: 7.07
Permittivity, ASTM D150, 1 MHz, Condition A: 5.24
Insulation Resistance, ASTM D257, Condition A: 17.3 Ohm x 10e14
Insulation Resistance, ASTM D257, Condition C: 7.38 Ohm x 10e14
Track Resistance, ASTM D2303: 1000 minutes
Dissipation Factor, ASTM D150, 60 Hz, Condition A: 0.017
Dissipation Factor, ASTM D150, 60 Hz, Condition D: 0.015
Dissipation Factor, ASTM D150, 1 MHz, Condition A: 0.019
Electric Strength, ASTM D149, Parallel, S/S in Oil, Condition A: 50 kv
Electric Strength, ASTM D149, Parallel, S/S in Oil, Condition D: 48 kv
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Glastic® SLC-2000, Glastic SLC2000, Glastic® , Glastic, GlasticSLC2000, SLC, SLC-2000, SLC2000, SLC:2000, SLC/2000, SLC+2000, SLC_2000, SLC 2000, Polyester, Thermoset, Polyester Thermoset, Polyester, TS, Polyester TS, Thermoset, TS, Bulk Molding, PolyesterThermoset, PolyesterTS, 2000SLC
Notes
1Typical properties: these are not to be construed as specifications.
2Method A (Short-Time)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.