IDES Prospector Already have an account? Login Here

IDES

LNP* Konduit* MT00E

Polypropylene

Proprietary Filler

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for LNP* Konduit* MT00E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP KONDUIT* MT00E is a compound based on Polypropylene resin containing Proprietary Thermal Filler. Added features of this material include: Thermally Conductive.

Also known as: LNP* Konduit* Compound MT-210-14
Product reorder name: MT00E
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Proprietary Filler
Features 
  • Thermally Conductive
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
      
Flow: 24 hr
in/in
 ASTM D955
Across Flow: 24 hr
in/in
 ASTM D955
Across Flow: 24 hr
%
 ISO 294-4
Flow: 24 hr
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Strength
      
Break
psi
 ASTM D638
Break
psi
 ISO 527-2
Tensile Elongation
      
Break
%
 ASTM D638
Break
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
      
--
psi
 ASTM D790
--
psi
 ISO 178
Coefficient of Friction
     ASTM D3702 Modified
vs. Itself - Dynamic
 
  
vs. Itself - Static
 
  
Wear Factor - Washer
10^-10 in^5-min/ft-lb-hr
 ASTM D3702 Modified
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
73°F
ft·lb/in
 ASTM D256
73°F 2
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact
      
73°F
ft·lb/in
 ASTM D4812
73°F 2
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 3
      
66 psi, Unannealed, 2.52 in Span
°F
 ISO 75-2/Bf
264 psi, Unannealed, 2.52 in Span
°F
 ISO 75-2/Af
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM E1530
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Konduit* MT00E, LNP Konduit MT00E, LNP* Konduit* , LNP Konduit, LNPKonduitMT00E, LNPKonduit, MT 00 E, MT00E, MT00, 00E, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC IP Asia, PolypropyleneUnspecified, PPUnspecified, 00MT
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
280*10*4
380*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.