LNP Verton RF-7007 EM HS SABIC IP Asia Polyamide 66 (Long Glass Fiber)

Product Description
LNP VERTON* RF-7007 EM HS is a compound based on Nylon 66 resin containing Long Glass. Added features of this material include: Easy Molding.
General
Material Status	Commercial: Active
Availability	Asia Pacific
Filler / Reinforcement	Long Glass Fiber
Features	Good Moldability
Automotive Specifications
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Water Absorption (24 hr, 50% RH)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Strength
Break		psi	ASTM D638
Break		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus
--		psi	ASTM D790
--		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact
73°F		ft·lb/in	ASTM D256
-40°F²		ft·lb/in²	ISO 180/1A
73°F²		ft·lb/in²	ISO 180/1A
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
264 psi, Unannealed, 0.126 in		°F	ASTM D648
264 psi, Unannealed, 2.52 in Span³		°F	ISO 75-2/Af
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Verton* RF-7007 EM HS, LNP Verton RF7007 EM HS, LNP* Verton* , LNP Verton, LNPVertonRF7007EMHS, LNPVerton, RF, RF-7007 EM HS, RF7007 EM HS, RF:7007 EM HS, RF/7007 EM HS, RF+7007 EM HS, RF_7007 EM HS, RF 7007 EM HS, RF7007, 7007EM, EMHS, RF7007EMHS, RF_7007EMHS, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, SABIC IP Asia, Polyamide66, Nylon66, 7007RF
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Good Moldability.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Back Pressure		psi
Screw Speed		rpm

Notes

¹Typical properties: these are not to be construed as specifications.

²80*10*4

³80*10*4 mm

LNP* Verton* RF-7007 EM HS

Polyamide 66

Long Glass Fiber

Supplied by SABIC Innovative Plastics Asia Pacific