IDES Prospector Already have an account? Login Here

IDES

LNP* Thermotuf* V1000

Polyamide 66

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for LNP* Thermotuf* V1000 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP THERMOTUF* V1000 is a compound based on Nylon resin. Added features of this material include: High Impact.

Also known as: LNP* Thermotuf* Compound V-1000
Product reorder name: V1000
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • High Impact Resistance
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
      
Flow: 24 hr
in/in
 ASTM D955
Across Flow: 24 hr
in/in
 ASTM D955
Across Flow: 24 hr
%
 ISO 294-4
Flow: 24 hr
%
 ISO 294-4
Water Absorption
      
24 hr, 50% RH
%
 ASTM D570
Equilibrium, 73°F, 50% RH
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield
psi
 ASTM D638
Yield
psi
 ISO 527-2
Break
psi
 ASTM D638
Break
psi
 ISO 527-2
Tensile Elongation
      
Yield
%
 ASTM D638
Yield
%
 ISO 527-2
Break
%
 ASTM D638
Break
%
 ISO 527-2
Flexural Modulus
      
--
psi
 ASTM D790
--
psi
 ISO 178
Flexural Strength
      
--
psi
 ASTM D790
--
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 3 (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength 3 (73°F)
ft·lb/in²
 ISO 180/1U
Instrumented Dart Impact
      
73°F, Energy at Peak Load
in·lb
 ASTM D3763
--
ft·lb
 ISO 6603-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 4
°F
 ISO 75-2/Af
CLTE
     ASTM E831, ISO 11359-2
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Thermotuf* V1000, LNP Thermotuf V1000, LNP* Thermotuf* , LNP Thermotuf, LNPThermotufV1000, LNPThermotuf, V 1000, V1000, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, SABIC IP Asia, Polyamide66, Nylon66, 1000V
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: High Impact Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
380*10*4
480*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.