IDES Prospector Already have an account? Login Here

IDES

NK Series NK55

Acrylic (SMMA) + SBC

Supplied by Styrolution International SA

The technical datasheet with complete property values for NK Series NK55 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
FEATURES
  • Good clarity, strength and toughness
  • Ease of processing

APPLICATIONS
  • Injection moulding
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Processability
  • Good Strength
  • Good Toughness
  • High Clarity
  
Agency Ratings 
 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (200°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain
     ISO 527-2
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/Af
Vicat Softening Temperature
°F
 ISO 306/B50
Optical
Nominal Value
Unit
Test Method
Haze (157 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: NK Series NK55, NK Series , NKSeriesNK55, NKSeries, SeriesNK 55, SeriesNK55, Series, NK 55, NK55, Acrylic + SBC, Acrylic SBC, Acrylic (SMMA) + SBC, Acrylic SMMA SBC, Acrylic (SMMA) : SBC, Acrylic : SBC, Acrylic (SMMA) / SBC, Acrylic / SBC, Acrylic (SMMA) - SBC, Acrylic - SBC, Acrylic (SMMA) _ SBC, Acrylic _ SBC, Acrylic _ SBC, Acrylic (SMMA) SBC, Acrylic SBC, SMMA+SBC, SMMASBC, SMMA:SBC, SMMA/SBC, SMMA-SBC, SMMA_SBC, SMMA SBC, Acrylic, Styrolution Intl, AcrylicSMMASBC, Acrylic SMMA _ SBC, AcrylicSMMA_SBC, 55NK, 55SeriesNK
Features
Features may also be described by the following terms: High Clarity, Good Strength, Good Processability, Easy Processing, Good Toughness, Tough.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), EEC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.