CYCOLOY C7122 Resin SABIC IP Asia Acrylonitrile Butadiene Styrene + PC (Mineral Filler)

Product Description

Cycoloy*C7122 is a mineral filled, non-halogenated flame retardant PC/ABS. Good stiffness with balanced flow and impact performance.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Filler / Reinforcement

Mineral Filler

Additive

Flame Retardant

Features

Flame Retardant

Good Flow

Good Impact Resistance

Good Stiffness

Halogen Free

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)		g/10 min	ASTM D1238
Molding Shrinkage - Flow (0.126 in)		in/in	Internal Method
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--²		psi	ASTM D638
--		psi	ISO 527-2/1
Tensile Strength
Yield		psi	Internal Method
Yield³		psi	ASTM D638
Break³		psi	ASTM D638
Break		psi	ISO 527-2/5
Tensile Elongation
Break		%	Internal Method
Break		%	ISO 527-2/5
Flexural Modulus
--		psi	ASTM D790
1.97 in Span⁴		psi	ASTM D790
--⁵		psi	ISO 178
Flexural Strength
--		psi	ASTM D790
--^5, 6		psi	ISO 178
Yield, 1.97 in Span⁴		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁷ (73°F)		ft·lb/in²	ISO 179/1eA
Notched Izod Impact
-22°F		ft·lb/in	ASTM D256
73°F		ft·lb/in	ASTM D256
-22°F⁸		ft·lb/in²	ISO 180/1A
73°F⁸		ft·lb/in²	ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)		in·lb	ASTM D3763
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed, 0.126 in		°F	ASTM D648
264 psi, Unannealed, 0.252 in		°F	ASTM D648
264 psi, Unannealed, 2.52 in Span⁹		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ISO 306/B50
--		°F	ISO 306/B120
CLTE			ASTM E831
Flow: -22 to 86°F		in/in/°F
Flow: -40 to 104°F		in/in/°F
Transverse: -40 to 104°F		in/in/°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0472 in
0.0591 in
0.0709 in
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, Cycloy Product names can be difficult to match. You may have searched any one of these terms to find this product: CYCOLOY* C7122 Resin, CYCOLOY C7122 Resin, CYCOLOY* , CYCOLOY, CYCOLOYC7122Resin, C 7122 Resin, C7122 Resin, C7122, 7122Resin, C7122Resin, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Asia, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 7122C
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free, Good Stiffness, Good Flow, Good Impact Resistance.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Drying Time, Maximum		hr
Suggested Max Moisture		%
Suggested Shot Size		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Back Pressure		psi
Screw Speed		rpm
Vent Depth		in

Notes

¹Typical properties: these are not to be construed as specifications.

²0.20 in/min

³Type I, 0.20 in/min

⁴0.051 in/min

⁵0.079 in/min

⁶Yield

⁷80*10*4 sp=62mm

⁸80*10*4

⁹80*10*4 mm

CYCOLOY* C7122 Resin

Acrylonitrile Butadiene Styrene + PC

Mineral Filler

Supplied by SABIC Innovative Plastics Asia Pacific