IDES Prospector Already have an account? Login Here

IDES

Bayblend® T50 BBS083

Acrylonitrile Butadiene Styrene + PC

Supplied by Bayer MaterialScience AG

The technical datasheet with complete property values for Bayblend® T50 BBS083 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Formerly Bayblend DP T50 BBS083; (PC+ABS) blend; unreinforced; injection molding grade; Vicat/B 120 = 115 °C; excellent flow; good low temperature impact strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Features 
  • Good Flow
  • Low Temperature Impact Resistance
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage 2
     ISO 2577
Across Flow: 500°F, 0.118 in
%
  
Flow: 500°F, 0.118 in
%
  
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress
     ISO 527-2/50
Yield, 73°F
psi
  
Break, 73°F
psi
  
Tensile Strain
     ISO 527-2/50
Yield, 73°F
%
  
Break, 73°F
%
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180
-22°F
 
  
73°F
 
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
CLTE
     ISO 11359-2
Flow: 73 to 131°F
in/in/°F
  
Transverse: 73 to 131°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity (73°F)
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
73°F, 100 Hz
 
  
73°F, 1 MHz
 
  
Dissipation Factor
     IEC 60250
73°F, 100 Hz
 
  
73°F, 1 MHz
 
  
Comparative Tracking Index (Solution A)
V
 IEC 60112
Electric Strength (73°F, 0.0394 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0335 in)
 
 UL 94
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (500°F, 1000 sec^-1)
Pa·s
 ISO 11443-A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® T50 BBS083, Bayblend T50 BBS083, Bayblend® , Bayblend, BayblendT50BBS083, T 50 BBS 083, T50 BBS083, T50, 50BBS, BBS083, T50BBS083, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer Euro, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 50T
Features
Features may also be described by the following terms: Good Flow, Low Temperatuer Impact Resistance, Low Temp Impact Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
2150x105x3 mm, 80°C MT
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.