Calsak ABS CS-72 Calsak Acrylonitrile Butadiene Styrene

General

Material Status

Availability

Features

Uses

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus² (0.125 in)		psi	ASTM D638
Tensile Strength² (Yield, 0.125 in)		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus² (0.125 in)		psi	ASTM D790
Flexural Strength² (0.125 in)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (73°F, 0.125 in)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
264 psi, Unannealed, 0.125 in		°F
264 psi, Annealed, 0.125 in		°F
Vicat Softening Temperature		°F	ASTM D1525
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0625 in)			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Calsak ABS CS-72, Calsak ABS CS72, Calsak ABS , CalsakABSCS72, CalsakABS, CS, ABSCS-72, ABSCS72, ABSCS:72, ABSCS/72, ABSCS+72, ABSCS_72, ABSCS 72, ABSCS, CS-72, CS72, CS:72, CS/72, CS+72, CS_72, CS 72, Acrylonitrile Butadiene Styrene, ABS, Calsak, AcrylonitrileButadieneStyrene, 72CS, 72ABSCS
Features
Features may also be described by the following terms: High Gloss, High Impact Resistance.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate
Back Pressure		psi
Clamp Tonnage		tons/in²
Injection Notes
Hold Pressure: 50 to 75% of injection pressure Screw Speed: Moderate

Notes

¹Typical properties: these are not to be construed as specifications.

²Type I

Calsak ABS CS-72