RELENE EE20 Reliance Polyethylene, High Density

Product Description

EE20 is a High Density Polyethylene (HDPE) grade with low gel content, excellent elongation and orientation characteristics with negligible water carry-over. This grade is recommended for making low denier raffia tapes with very good elongation and moderate tenacity and recommended for wrapping fabrics for various applications.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Features

Food Contact Acceptable

Low Gel

Low Water Carryover

Uses

Fabrics

Tape

Agency Ratings

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Films	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D882
MD: Yield, 1.6 mil, Blown Film		psi
TD: Yield, 1.6 mil, Blown Film		psi
MD: Break, 1.6 mil, Blown Film		psi
TD: Break, 1.6 mil, Blown Film		psi
Tensile Elongation			ASTM D882
MD: Break, 1.6 mil, Blown Film		%
TD: Break, 1.6 mil, Blown Film		%
Dart Drop Impact (1.6 mil, Blown Film)		g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD: 1.6 mil, Blown Film		g
TD: 1.6 mil, Blown Film		g
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® EE20, RELENE EE20, RELENE® , RELENE, RELENEEE20, EE 20, EE20, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Reliance, PolyethyleneHighDensity, 20EE
Features
Features may also be described by the following terms: Low Gel, Low Water Carryover.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).

Notes

¹Typical properties: these are not to be construed as specifications.

RELENE® EE20

High Density Polyethylene

Supplied by Reliance Industries Limited