IDES Prospector Already have an account? Login Here

IDES

M. Holland Branded Resins GS220WC

General Purpose Polystyrene

Supplied by M. Holland Company

The technical datasheet with complete property values for M. Holland Branded Resins GS220WC is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break, 73°F)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306
Additional Information
Tensile Strain at Break, ISO 527-1, -2: < 3%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: M. Holland Branded Resins GS220WC, M Holland Branded Resins GS220WC, M. Holland Branded Resins , M Holland Branded Resins, MHollandBrandedResinsGS220WC, MHollandBrandedResins, ResinsGS 220 WC, ResinsGS220WC, ResinsGS220, Resins, GS 220 WC, GS220WC, GS220, 220WC, PS, Polystyrene, General Purpose, Polystyrene General Purpose, PS (GPPS), PS GPPS, Polystyrene, M. Holland, PolystyreneGeneralPurpose, PSGPPS, 220GS, 220ResinsGS
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.