IDES Prospector Already have an account? Login Here

IDES

M. Holland Branded Resins LL106MM

Linear Low Density Polyethylene

Supplied by M. Holland Company

The technical datasheet with complete property values for M. Holland Branded Resins LL106MM is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Medium Antiblock
  • Medium Slip
  
Features 
  • High Strength
  • Medium Antiblocking
  • Medium Slip
Uses 
  • Film
  • Packaging
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
1% Secant, MD
psi
  
1% Secant, TD
psi
  
Tensile Strength
     ASTM D882
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD
g
  
TD
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: M. Holland Branded Resins LL106MM, M Holland Branded Resins LL106MM, M. Holland Branded Resins , M Holland Branded Resins, MHollandBrandedResinsLL106MM, MHollandBrandedResins, ResinsLL 106 MM, ResinsLL106MM, ResinsLL106, Resins, LL 106 MM, LL106MM, LL106, 106MM, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, M. Holland, PolyethyleneLinearLowDensity, 106LL, 106ResinsLL
Features
Features may also be described by the following terms: Medium Antiblocking, Medium Antiblock, Medium Slip, High Strength.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.